How to body painting -third part-
5. The polycarbonate body, use the polycarbonate dedicated paint
The polycarbonate body will use the "polycarbonate dedicated paint".
Unlike general paint that is sold in plastic model for or home center, polycarbonate paints looks like paint is biting eroded to the body surface.
If in case you want to paint a polycarbonate body in a plastic model for and general paint, thinned 1 blown clear of polycarbonate dedicated paint on painted surfaces, will not peel off to paint from drying.
Spray cans of cold season can be well and paint from warm 5 to 10 minutes in the hot water of about 60 degrees because the paint is less likely to be injected.
However until hot Let's note that explode with heat.
6. knack of painting is to paint also thin and over again
Knack of painting is to be color paint thinner many times without thick coating at a time.
If you divide the paint so that it will paint from the dark color.
Finally, paint the whole in white, will color the whole is tight and further painted in black.
Peel off the masking tape of the window When you have finished painting, remove the protective sheet of the body surface.
Then cut the wheel arches and the extra part of the body, and finish last to put a decal.
It should be noted that, let's see if peeled off again protective sheet before you put a decal.
It is ruined and put a decal on the protective sheet.
The body paint takes also time and effort and time, but please strive for good looking body!
［SponsorLink］
Post a Comment