Header Ads

How to body painting -first part-

photo credit: D1 GRAND PRIX SERIES Rd.1 TOKYO DRIFT via photopin (license)

Charm of the drift car is also to feel full of body.
If the drift in the good-looking body, Nashi attention up mistakes from everyone!

The radio control car of the body is used material called polycarbonate (polycarbonate), nor different procedure paint and paint plastic model.

Polycarbonate body is painted from the back.
Is also a regular table painted the order of painted it will be to reverse.
Here we tell the knack of polycarbonate body paint.

1. drilled body post holes carefully!

It is suddenly good well into the body painting, but let's finish the pre-processing thinking about later.
There is also a hole drilled and the wheel arch pre-cut body of the body post in, but the majority is required because the drilling and the cut is the figure of the left that has been vacuum molding.

First, do the drilling of the body post.
This work is the most difficult in the body production, you will be prompted to prudence.
Covered with a body to the chassis to move the body to a position that meets the wheel arch center and the wheel fixing nut.
Then move the wheels at both ends with the (chassis full width) of the body so that the body clearance is made to the left and right equally.

This marked so was decided body post position, drill a hole in the body reamer.
Drilled holes in the body reamer is carried out little by little, to fix the hole position with a stick file or a utility knife if there is a shift.
Put the chassis Once you have drilled holes in the platform, such as tire floats Place the body.

And the marking to skirt the line of the center position and the body of the wheel arch.
Marking would be a good idea to put the cellophane tape so that it does not disappear.
If it should be noted that in the completeness, you may want to mark the center line to the body.

2.Marking a painted line

If you want to paint the minute in the plurality of colors, it makes it easier to do the masking and marking the lines painted on the body surface, image after painting will have sprung.
When particularly complex painted a line modified until convincing, it is a good idea to write the order of the coating division.

It will continue to the next...
[SponsorLink]
Powered by Blogger.